Bootrec Rebuildbcd Total Identified Windows Installations 0

'/RebuildBcd' etc returns 'total identified windows installations. I then tried bootrec.exe /RebuildBcd. 'total identified windows installations: 0'. Bootrec Windows Installations 0. After trying to bootrec/rebuildbcd I find that there are 'Total identified Windows installations: 0'. Automatic disk repair and pretty much everything else. And paste bootrec /rebuildbcd in the. Installations total identified windows installations 0. BootMgr is missing, usual fixes don't. Total identified Windows installations: 0' BootRec /RebuildBcd - I get the message 'Total identified Windows installations: 0'.

2) Win7 system partition now has the same ID as WinVista system partition used to have, so two references now collide: bootloader with old settings tries to boot Win7 as Vista, but fails. Basically you need to remove BCD registry hive and rebuild it from scratch, and also fix reference to disk C: in Win7's MountedDevices in SYSTEM registry hive. Using you can delete BCD in the 'File Manager', then recreate BCD from scratch and fix MountedDevices in 'Mount & Boot Center'. This is just a clarifying comment on Narkevich's remark (I wanted just to add a comment but seemed to be barred from doing so The reason you didn't need the /s x: option is that by default, bcd boot changes the bcd on the volume which is currently active. That's almost always what you want.

If used, the System Reserved partition is often assigned the letter C:, and Windows will be on D: Click File Open. Click Computer in the left Panel. Note the drive letters shown. Close Notepad.

Recently, I have shared you the fix about error which you can read using following link: Actually, the boot record is consists of two files; Boot Configuration Data ( BCD) and Master Boot Record ( MBR). Thus when you’re not able to boot your system at all, the probability is that either of these two files is corrupted or inaccessible. In such scenario, if you open the Boot Configuration Data using Command Prompt at boot, you’ll see following error: The boot configuration data store can not be opened. The requested system device cannot be found. Now since the boot records are malfunctioned, Windows won’t let you to. It’ll keep saying The drive where Windows is installed is locked. Unlock the drive and try again.

If one specifies /s and a drive letter, then either 1. The drive letter is the active volume, and the command would do the same thing without /s x: as with it;or 2. The drive letter is different from the current active volume. In this case what actually happens at boot time could only affected if either the bcd on the active disk is corrupt, and or 2. At some later time you change which disk is marked active to the one named after /s.

[*]Press Scan button. [*]It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.[/list] NEXT: Please make sure you include the following items in your next post: 1. Any comments or questions you may have that you'd like for me to answer in my next post to you. An update on how your computer is currently running. It would be helpful if you could answer each question in the order asked, as well as numbering your answers.

• Since the BCD store exists and lists a Windows installation, you'll first have to remove it manually and then try to rebuild it again. At the prompt, execute the bcdedit command as shown and then press Enter: bcdedit /export c: bcdbackup The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a. The command should return the following on screen, meaning the BCD export worked as expected: The operation completed successfully.

What else can I try? This seems to indicate that faced with an empty disk, Windows installation does extra initializations that are not done for repair. My advice of clearing out the BCD store might have had the same effect or might not, maybe not. It is because of such unknowns that if the usual solutions don't work, one should reformat the disk and start afresh (as I also advised). You were real lucky to have been able to keep your Windows partition, which probably worked only because you have already done Startup Repair on it, which has fixed up the registry but not all of the boot-sector(s) files.

Ok so my pc has been acting up. Again, this time i litterally have no idea what to do or why it happened. One day it just shut down and would not startup any more, it goes straight to startup repair and fails and loops this.

Note: You could delete the BCD file entirely since you're about to create a new one. However, renaming the existing BCD accomplishes the same thing since it's now unavailable to Windows, plus provides you yet another layer of backup, in addition to the export you did in Step 5, if you decide to undo your actions. • Try rebuilding the BCD again by executing the following, followed by Enter: bootrec /rebuildbcd It should produce this in the Command Prompt window: Scanning all disks for Windows installations. Please wait, since this may take a while. Successfully scanned Windows installations. Total identified Windows installations: 1 [1] D: Windows Add installation to boot list?

One easiest fix to sweep out this issue is that you create a bootable Windows installation disk using ISO image of any Windows edition released after Windows 7. Then you have to plug it and using it install the Windows edition on any other partition. In others words, create a dual boot environment. Once you’ve installed a new Windows edition in parallel to original Windows edition whose boot records are compromised, you’ll found that problem is automatically fixed. You can then uninstall the alternative installed Windows so far, and start using your original installation since the issue is resolved.

You can then uninstall the alternative installed Windows so far, and start using your original installation since the issue is resolved. But if you can’t follow the above mentioned process, here is how to get rid of this issue very easily: FIX: Windows 10 Master Boot Record Is Corrupted 1. Boot into. Hit the Command prompt entry at following screen. Last step will result in opening of Command Prompt at boot. Select your admin account and enter your select account password to continue. Then type following command: chkdsk /r After the check disk is completed, you may try booting the computer and check if that resolves the issue. If the issue persists, then try performing a SFC scan using SFC /SCANNOW command to rebuild or recover the corrupted system files on the computer.

With a bootable Ubuntu flash drive you can see whether the problem is only windows or whether it is related to the hardware. There are additional options for the remaining flash drive.

It’ll keep saying The drive where Windows is installed is locked. Unlock the drive and try again. One easiest fix to sweep out this issue is that you create a bootable Windows installation disk using ISO image of any Windows edition released after Windows 7. Then you have to plug it and using it install the Windows edition on any other partition. In others words, create a dual boot environment. Once you’ve installed a new Windows edition in parallel to original Windows edition whose boot records are compromised, you’ll found that problem is automatically fixed.

A) Boot from the disk, Once you get the welcome screen of installation with the option “Install now” b) Click on Repair your computer c) On the next page click on Advanced Options d) Now click on Troubleshoot e ) Lastly click on Command prompt and follow the on screen instructions 2. At the prompt, type the bootrec command as shown below and then press Enter: bootrec /rebuildbcd The bootrec command will search for Windows installations not included in the Boot Configuration Data and then ask you if you'd like to add one or more to it. You should see the following message. Scanning all disks for Windows installations. Please wait, since this may take a while. Successfully scanned Windows installations. Total identified Windows installations: 0 The operation completed successfully.

I'm not sure if that works for this Dimension since it's older though. When you first see the Dell screen, hit F12 continually and see if it pulls up a boot mode menu with an option to select and run diagnostics. The diagnostic tool will give you an error code on the hard drive if it has problems. Otherwise, you could only really tell with chkdsk errors or an error that the drive isn't detected at all.

Since the BCD store exists and lists a Windows installation, you'll first have to 'remove' it manually and then try to rebuild it again. At the prompt, execute the bcdedit command as shown and then press Enter: bcdedit /export c: bcdbackup The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a file extension.

– Nov 23 '11 at 9:44 •. I guess that you had Vista on the disk as partition 1 and then Windows 7 as partition 2, then deleted Vista, meaning that Windows 7 is now on partition 1. Unfortunately, Windows identifies its partitions by their numbers, so that all partition references in the Windows 7 registry are now incorrect and unusable. I believe that you will have to reinstall Windows 7.

• I am going to stick with you until ALL malware is gone from your system. I would appreciate it if you would do the same. From this point, we're in this together • Because of this, you must reply within 3 days failure to reply will result in the topic being closed! I like chocolate chip cookies. • Lastly, I am no magician. I will try very hard to fix your issues, but no promises can be made. Also be aware that some infections are so severe that you might need to resort to reformatting and reinstalling your operating system or even taking your computer into a repair shop.

Telephony We help a whole range of businesses to achieve more by streamlining operations, lowering costs and raising efficiency with cutting edge telephony. Security Your systems are prone to cyber attacks that could cripple your business. No one wants that, that is why we ensure that you are always protected. Backup Just as you keep an extra key as a backup in case something goes wrong, we keep your files safe so you can access them if something should happen. IT Support Have a look at our comprehensive and tailored support packages to see which will best suit your business needs now and in the future. Proof That We Know IT • We have been providing IT services for over a decade • We pick up calls on the second ring 100% of the time • Our team is professional, courteous and we know our stuff • Office hours are 8.30am - 6.00pm, Mon-Fri excluding bank holidays and weekends • We support businesses in Greater London and surrounding counties Why Us? • We are interested in the success of your business • Caring is our culture • We are passionate about technology The future is bright when you are Getting IT Right!

Note that Windows actually protects you from tempering with it, they are not meant to be edited. If any, the paths you mentioned are kind of irrelevant; DVD PCAT means you are looking into the Product Catalog part of the Boot Manager of Installer copied of the DVD. You could attempt to copy BCD from that to see whether that has any effect to restore your BCD to an original state, which could work; but don't forget to make a back-up first. You can gain permission, make sure that while doing so that you don't remove any permissions.

There is a chance that data can be lost, so you may want to recover the files first. Boot with the Vista/Win7 DVD, or Repair CD. Select your Language, click Next Click Repair your Computer It will scan for Vista/Win 7 installations, wait for it to finish. (It won't list XP installations).

If rebuilding the BCD store doesn't resolve the startup issue, you can export and delete the BCD store and then run this option again. By doing this, you make sure that the BCD store is completely rebuilt. Here is the command: bcdedit /export C: BCD_Backup c: cd boot attrib bcd -s -h -r ren c: boot bcd bcd.old bootrec /RebuildBcd To troubleshoot a boot up issue, you should firstly use the command to have a full scan sfc /scannow /offbootdir=d: /offwindir=d: windows Then follow the above reference to determine the active partition and rebuild the bcd store. After that, if is specific a.sys file, you can use the command to fix the specific file or use robocopy command to copy the file from a working machine and export to the problematic machine. Sfc /scanfile = /offbootdir=d: /offwindir=d: windows Please remember to mark the replies as answers if they help. If you have feedback for TechNet Subscriber Support, contact.

Please wait, since this may take a while. Successfully scanned Windows installations. Total identified Windows installations: 1 [1] D: Windows Add installation to boot list? Yes/No/All: meaning that the BCD store rebuild is progressing as expected.

By WZT --------------------------------------------------------------------------------------- Enterprise 64-bit (OEM): MICROSOFT.WINDOWS.7. ENTERPRISE.RTM.WITH.SP1.X64.VOLUME.OEM.ENG Lish. Microsoft windows 7 professional rtm x64 volume oem english dvd-wzt. DVD-WZT BUILD: 7601.19-1850 7601.19-1850_x86fre_enterprise_en-us_VL_OEM_Enterprise-GRMCENVOL_EN_DVD.iso SIZE: 2,433,157,120 byte SHA-1: 4788041EB06E0F49720C112FBD256AC637909D4F MD5: 0F75C64DE4B10FD581845ABA99E1591D CRC: E3382829 NOTE: this is original M $ Image. ENTERPRISE.RTM.WITH.SP1.X86.VOLUME.OEM.ENG Lish.

You are welcome. Hi Srishti Chaudhary, This error is received when a critical system file is missing or has become corrupted. It could also happen when the Boot Configuration file BCD is missing some required information or has become corrupted. Always you could boot into Recovery Options in Windows 10, then using the Start Up option to auto repair.

Meaning none. Please help!!!

Similar help and support threads Thread Forum I've got an error status 0xc0000098 within the Boot/BCD files and when I do the /RebuildBCD command, it can't identify any Windows installations. The reserved system files are in the C partition, wich is active, and the Windows files are in the D partition. I have Ubuntu installed in my. General Discussion More - Nearly half of Windows 7 installations are 64-bit News I recently had a friend try to boot a DVD off my system and now am having problems with my MBR. The system keeps coming up asking me which installation of Windows 7 I want to run. If I choose the first one I get an error that says the installation doesn't exist (which it doesn't).

Once you have the Macrium image you have then given yourself an new backup option. 2) create a restore point 3) backup files 4) check the drive for bad blocks Run Sea tools for windows on your drive using SMART, short and long generic tests: How to use SeaTools for Windows Let's see if this is a possible fix. 1) boot to the Windows 10 iso 2) it may take 5 minutes displaying the windows icon 3) Use the default settings for language, time, currency, and keyboard 4) click next 5) In the left lower corner click Repair your computer 6) click troubleshooting 7) click startup repair (it is expected to fail) 8) click system restore (it is expected to fail) 9) click command prompt You should see a pop up with title bar: Administrator: X: windows system32 cmd.exe This is the registry backup method: For each step you must see sizeable file sizes for this to work. If you see zeros the method will fail. The command: dir will be used each step to make sure you are in the proper location and check the size of the files 10) type: C: 11) dir 12) type: D: 13) dir Choose the C: or the D: drive to proceed. It should be the windows drive and not the USB drive. For this post I will use C: however you should pick the drive letter that you found that has the windows files on your computer.

The command should return the following on screen: The operation completed successfully. Meaning the BCD export worked as expected. At this point, you need to adjust several file attributes for the BCD store so you can manipulate it.

One problem is you can't copy hidden or system files this way, as they don't show up. Or a Linux Live CD can be used to copy files to an external drive, over a network to another PC, or burn them to CD/DVD. Here's a guide to using Ubuntu for this: Version 10 looks different than the screen shots, you don't get the same boot menu. Just be sure to choose the Try option, not the Install option when asked.

BOOTREC /REBUILDBCD and press Enter. If it’s not successful or you receive ‘No operating system found’ or ‘Element not found’ messages, go back to the Command Prompt and make the partition active by typing these commands: DISKPART and press Enter. LIST DISK and press Enter. SELECT DISK N and press Enter (N represents the disk you want). LIST PARTITION and press Enter.

1) Were you able to correct the boot failure and boot normally to windows and have it fail a second time? 2) Please explain in detail each step that you made. 3) Did you open the bios and change anything? 4) Did you attempt the registry repair? 5) Did you test the drive? 6) Did you make a backup image? 7) Again please provide details so we know what was and what was not done.

16) type: MD backup Copy all of the files into this new directory. 17) type or copy and paste: copy *.* backup It should now display: bbi, bcd-template, components, default, drivers, elam, sam, security, software, system, vsmidk indicating the files were copied. Change the directory to regback 18) type: cd regback It should now display: c: windows system32 config regback> 19)type: dir It should display: default, sam, security, software, system etc All of these files must be sizeable. If it displays zeros then abort. 20) type or copy and paste: copy *.*.

• If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings. • Click Repair your computer. • Select US as the keyboard language settings, and then click Next. • Select the operating system you want to repair, and then click Next. • Select your user account and click Next. On the System Recovery Options menu you will get the following options: Startup Repair System Restore Windows Complete PC Restore Windows Memory Diagnostic Tool Command Prompt[*]Select Command Prompt [*]In the command window type in notepad and press Enter.

At the Add installation to boot list? Question, type Enter Y or Yes, followed by the Enter key.

If you would like to be considered for trusted flair, please Please Support the EFF! Like our subreddit?

They give you stickers! Hi there, I am running Windows 7 Professional on a Dell Dimension E520. Today while browsing my PC froze, so I shut down using the button and then tried to reboot. It hung at the Windows logo screen, so I then rebooted and tried 'startup repair' options. It didnt seem to work and hung on that 'repairing' screen for two hours, then I headed back to google and found someone with similar probelm: And then tried again but used their method with command prompt. After the first and 2nd: bootrec.exe /fixmbr bootrec.exe /fixboot both succesful I then tried bootrec.exe /RebuildBcd But, it returned: 'total identified windows installations: 0' Then, realising I was in x: drive instead of c: I tried to change directories but when I typed c: it seemed to move there but I couldn't type anymore when it had, so I seem to be stuck in x: and have no idea whats going on now!